 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MURS205T3, MURS210T3 Preferred Device Surface Mount Ultrafast Power Rectifiers Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. http://onsemi.com Features * * * * * Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (0.74 V Max @ 2.0 A, TJ = 150C) Pb-Free Packages are Available ULTRAFAST RECTIFIERS 2 AMPERES, 50-100 VOLTS Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 95 mg (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead SMB CASE 403A MARKING DIAGRAM MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage MURA205T3 MURA210T3 Average Rectified Forward Current @ TL = 150C @ TL = 125C Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Operating Junction Temperature Symbol VRRM VRWM VR IF(AV) 1.0 2.0 IFSM 50 A Value Unit V 50 100 A Assembly Location Year Work Week Device Code x = A for MURS205T3 = B for MURS210T3 G = Pb-Free Package (Note: Microdot may be in either location) A Y WW U2x = = = = AYWW U2x G G TJ -60 to +175 C THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Lead (TL = 25C) Symbol RqJL Max 13 Unit C/W ORDERING INFORMATION Device MURS205T3 MURS205T3G MURS210T3 MURS210T3G Package SMB SMB (Pb-Free) SMB SMB (Pb-Free) Shipping 2500 Tape & Reel 2500 Tape & Reel 2500 Tape & Reel 2500 Tape & Reel Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2006 1 February, 2006 - Rev. 1 Publication Order Number: MURS205T3/D MURS205T3, MURS210T3 ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 1) (iF = 2.0 A, TJ = 25C) (iF = 2.0 A, TJ = 150C) Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 150C) Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/ms, Rec. to 1.0 V) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. Symbol vF 0.94 0.74 iR 2.0 50 trr 30 20 tfr 20 ns ns mA Value Unit V 10 7.0 5.0 10 7.0 5.0 3.0 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 2.0 175C 100C IF, INSTANTANEOUS FORWARD CURRENT (mA) 3.0 2.0 175C 100C 1.0 0.7 0.5 TC = 25C 0.3 0.2 1.0 0.7 0.5 25C 0.3 0.2 0.1 0.07 0.05 0.1 0.07 0.05 0.03 0.02 0.03 0.02 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 vF, INSTANTANEOUS VOLTAGE (VOLTS) vF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage http://onsemi.com 2 MURS205T3, MURS210T3 100 IR, REVERSE CURRENT (mA) TJ = 175C 10 IR, REVERSE CURRENT (mA) 100 TJ = 175C 10 TJ = 100C 1 TJ = 25C 1 TJ = 100C TJ = 25C 0.1 0.1 0.01 0 20 40 60 80 100 VR, REVERSE VOLTAGE (VOLTS) 0.01 0 20 40 60 80 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 3. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. Figure 4. Maximum Reverse Current* 50 45 C, CAPACITANCE (pF) 40 35 30 25 20 15 10 5 0 0 4 8 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) NOTE: TYPICAL CAPACITANCE AT 0 V = 44 V 50 45 C, CAPACITANCE (pF) 40 35 30 25 20 15 10 5 0 0 4 8 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) NOTE: MAXIMUM CAPACITANCE AT 0 V = 47 V Figure 5. Typical Capacitance IF(AV), AVERAGE FORWARD CURRENT (AMPS) PF, AVERAGE POWER DISSIPATION (WATTS) Figure 6. Maximum Capacitance 10 9 8 7 6 5 4 3 2 1 0 80 90 SQUARE WAVE 100 110 120 130 140 150 160 170 180 TC, CASE TEMPERATURE (C) dc RATED VOLTAGE APPLIED RqJC = 13C/W TJ = 175C 4 3.5 3 2.5 2 SQUARE WAVE 1.5 1 dc 0.5 0 0 0.5 1 1.5 2 2.5 IF(AV), AVERAGE FORWARD CURRENT (AMPS) TJ = 175C Figure 7. Current Derating, Case Figure 8. Power Dissipation http://onsemi.com 3 MURS205T3, MURS210T3 PACKAGE DIMENSIONS SMB CASE 403A-03 ISSUE F HE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. DIM A A1 b c D E HE L L1 MIN 1.90 0.05 1.96 0.15 3.30 4.06 5.21 0.76 MILLIMETERS NOM MAX 2.13 2.45 0.10 0.20 2.03 2.20 0.23 0.31 3.56 3.95 4.32 4.60 5.44 5.60 1.02 1.60 0.51 REF MIN 0.075 0.002 0.077 0.006 0.130 0.160 0.205 0.030 INCHES NOM 0.084 0.004 0.080 0.009 0.140 0.170 0.214 0.040 0.020 REF MAX 0.096 0.008 0.087 0.012 0.156 0.181 0.220 0.063 b D A L L1 c A1 SOLDERING FOOTPRINT* 2.261 0.089 2.743 0.108 2.159 0.085 SCALE 8:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 MURS205T3/D |
Price & Availability of MURS210T3G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |